Will Green Will Green's Profile Page

Will Green Will Green

0 Course Enrolled • 0 Course Completed

Biography

Free PDF Quiz 2025 Juniper JN0-351: Enterprise Routing and Switching, Specialist (JNCIS-ENT) Fantastic Intereactive Testing Engine

It is apparent that a majority of people who are preparing for the JN0-351 exam would unavoidably feel nervous as the exam approaching, since you have clicked into this website, you can just take it easy now--our JN0-351 learning materials. Our company has spent more than 10 years on compiling study materials for the exam, and now we are delighted to be here to share our JN0-351 Study Materials with all of the candidates for the exam in this field. There are so many striking points of our JN0-351 preparation exam.

Our company has always been following the trend of the JN0-351 certification. Our research and development team not only study what questions will come up in the JN0-351 exam. The content of our JN0-351 practice materials is chosen so carefully that all the questions for the exam are contained. And our study materials have three formats which help you to read, test and study anytime, anywhere. This means with our products you can prepare for exams efficiently. If you desire a JN0-351 Certification, our products are your best choice.

>> JN0-351 Intereactive Testing Engine <<

Unlimited JN0-351 Exam Practice | New JN0-351 Test Tutorial

Now we can say that Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) exam questions are real and top-notch JN0-351 exam questions that you can expect in the upcoming Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) exam. In this way, you can easily pass the JN0-351 exam with good scores. The countless JN0-351 Exam candidates have passed their dream Juniper JN0-351 certification exam and they all got help from real, valid, and updated JN0-351 practice questions, You can also trust on PrepAwayPDF and start preparation with confidence.

Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) Sample Questions (Q17-Q22):

NEW QUESTION # 17
Which two types of tunnels are able to be created on all Junos devices? (Choose two.)

A. STP
B. IP-IP
C. IPsec
D. GRE

Answer: C,D

Explanation:
Explanation
Junos devices support various types of tunnels for different purposes12.
Option B is correct. Generic Routing Encapsulation (GRE) is a tunneling protocol that can encapsulate a wide variety of network layer protocols inside virtual point-to-point links over an Internet Protocol network1. Junos devices support GRE tunnels1.
Option D is correct. IPsec (Internet Protocol Security) is a protocol suite for securing Internet Protocol (IP) communications by authenticating and encrypting each IP packet of a communication session1. Junos devices support IPsec tunnels1.
Option A is incorrect. Spanning Tree Protocol (STP) is not a type of tunnel. It's a network protocol designed to prevent loops in a bridged Ethernet local area network2.
Option C is incorrect. While Junos devices do support IP-IP (also known as IP tunneling), it's not supported on all Junos devices1.

NEW QUESTION # 18
Exhibit

You have configured a GRE tunnel. To reduce the risk of dropping traffic, you have configured a keepalive OAM probe to monitor the state of the tunnel; however, traffic drops are still occurring.
Referring to the exhibit, what is the problem?

A. For GRE tunnels, the OAM protocol requires that the BFD protocols also be used.
B. The "event link-adjacency-loss" option must be set.
C. The hold-time value must be two times the keepalive-time value
D. LLDP needs to be removed from the gr-1/1/10.1 interface.

Answer: C

Explanation:
Explanation
A keepalive OAM probe is a mechanism that can be used to monitor the state of a GRE tunnel and detect any failures in the tunnel path. A keepalive OAM probe consists of sending periodic packets from one end of the tunnel to the other and expecting a reply. If no reply is received within a specified time, the tunnel is considered down and the line protocol of the tunnel interface is changed to down1.
To configure a keepalive OAM probe for a GRE tunnel, you need to specify two parameters: the keepalive-time and the hold-time. The keepalive-time is the interval between each keepalive packet sent by the local router. The hold-time is the maximum time that the local router waits for a reply from the remote router before declaring the tunnel down2.
According to the Juniper Networks documentation, the hold-time value must be two times the keepalive-time value for a GRE tunnel2. This is because the hold-time value must account for both the round-trip time of the keepalive packet and the processing time of the remote router. If the hold-time value is too small, it may cause false positives and unnecessary tunnel flaps.
In the exhibit, the configuration shows that the keepalive-time is set to 10 seconds and the hold-time is set to
15 seconds for the gr-1/1/10.1 interface. This means that the local router will send a keepalive packet every 10 seconds and will wait for 15 seconds for a reply from the remote router. However, this hold-time value is not two times the keepalive-time value, which violates the recommended configuration. This may cause traffic drops if the remote router takes longer than 15 seconds to reply.
Therefore, option D is correct, because the hold-time value must be two times the keepalive-time value for a GRE tunnel. Option A is incorrect, because BFD is not required for GRE tunnels; BFD is another protocol that can be used to monitor tunnels, but it is not compatible with GRE keepalives3. Option B is incorrect, because the "event link-adjacency-loss" option is not related to GRE tunnels; it is an option that can be used to trigger an action when a link goes down4. Option C is incorrect, because LLDP does not need to be removed from the gr-1/1/10.1 interface; LLDP is a protocol that can be used to discover neighboring devices and their capabilities, but it does not interfere with GRE tunnels5.
References:
1: Configuring Keepalive Time and Hold time for a GRE Tunnel Interface 2: keepalive | Junos OS | Juniper Networks 3: Configuring Bidirectional Forwarding Detection 4: event link-adjacency-loss | Junos OS | Juniper Networks 5: Understanding Link Layer Discovery Protocol

NEW QUESTION # 19
Exhibit.

You want to verify prefix information being sent from 10.36.1.4.
Which two statements are correct about the output shown in the exhibit? (Choose two.)

A. The routes displayed have traversed one or more autonomous systems.
B. The output shows routes that are active and rejected by an import policy.
C. The routes displayed are being learned from an I BGP peer.
D. The output shows routes that were received prior to the application of any BGP import policies.

Answer: A,D

Explanation:
Explanation
The output shown in the exhibit is the result of the command "show ip bgp neighbor 10.36.1.4 received-routes", which displays all received routes (both accepted and rejected) from the specified neighbor.
Option A is correct, because the routes displayed have traversed one or more autonomous systems. This can be seen from the AS_PATH attribute, which shows the sequence of AS numbers that the route has passed through. For example, the route 10.0.0.0/8 has an AS_PATH of 65001 65002, which means that it has traversed AS 65001 and AS 65002 before reaching the local router.
Option B is correct, because the output shows routes that were received prior to the application of any BGP import policies. This can be seen from the fact that some routes have a status code of "r", which means that they are rejected by an import policy. The"received-routes" keyword shows the routes coming from a given neighbor before the inbound policy has been applied. To see the routes after the inbound policy has been applied, the "routes" keyword should be used instead.
Option C is incorrect, because the output does not show routes that are active and rejected by an import policy.
The status code of "r" means that the route is rejected by an import policy, but it does not mean that it is active. The status code of ">" means that the route is active and selected as the best path. None of the routes in the output have both ">" and "r" status codes.
Option D is incorrect, because the routes displayed are not being learned from an IBGP peer. An IBGP peer is a BGP neighbor that belongs to the same AS as the local router. The output shows that the neighbor 10.36.1.4 has a remote AS of 65001, which is different from the local AS of 65002. Therefore, the neighbor is an EBGP peer, not an IBGP peer.

NEW QUESTION # 20
Which two statements about redundant trunk groups on EX Series switches are correct? (Choose two.)

A. Redundant trunk groups use spanning tree to provide loop-free redundant uplinks.
B. Layer 2 control traffic is permitted on the secondary link.
C. Redundant trunk groups load balance traffic across two designated uplink interfaces.
D. If the active link fails, then the secondary link automatically takes over.

Answer: B,D

Explanation:
C is correct because Layer 2 control traffic is permitted on the secondary link of a redundant trunk group (RTG) on EX Series switches. Layer 2 control traffic includes protocols such as LLDP, LACP, and STP, which are used to exchange information and coordinate actions between switches1. According to the Juniper Networks documentation2, Layer 2 control traffic is allowed to pass through both the active and the secondary links of an RTG, but data traffic is only forwarded through the active link. This allows the switches to maintain their Layer 2 adjacencies and monitor the link status on both links.
D is correct because if the active link fails, then the secondary link automatically takes over in an RTG on EX Series switches. An RTG consists of two trunk links: an active or primary link, and a secondary or backup link2. The active link is used to forward data traffic, while the secondary link is in standby mode. If the active link fails or becomes unavailable, the secondary link immediately transitions to a forwarding state and takes over the data traffic without waiting for normal STP convergence2. This provides fast recovery and redundancy for the network.

NEW QUESTION # 21
Which two statements are correct about tunnels? (Choose two.)

A. Tunnels add additional overhead to packet size.
B. Tunnel endpoints must have a valid route to the remote tunnel endpoint.
C. BFD cannot be used to monitor tunnels.
D. IP-IP tunnels are stateful.

Answer: A,B

Explanation:
Explanation
A tunnel is a connection between two computer networks, in which data is sent from one network to another through an encrypted link. Tunnels are commonly used to secure data communications between two networks or to connect two networks that use different protocols.
Option B is correct, because tunnel endpoints must have a valid route to the remote tunnel endpoint. A tunnel endpoint is the device that initiates or terminates a tunnel connection. For a tunnel to be established, both endpoints must be able to reach each other over the underlying network. This means that they must have a valid route to the IP address of the remote endpoint1.
Option D is correct, because tunnels add additional overhead to packet size. Tunnels work by encapsulating packets: wrapping packets inside of other packets. This means that the original packet becomes the payload of the surrounding packet, and the surrounding packet has its own header and trailer. The header and trailer of the surrounding packet add extra bytes to the packet size, which is called overhead. Overhead can reduce the efficiency and performance of a network, as it consumes more bandwidth and processing power2.
Option A is incorrect, because BFD can be used to monitor tunnels. BFD is a protocol that can be used to quickly detect failures in the forwarding path between two adjacent routers or switches. BFD can be integrated with various routing protocols and link aggregation protocols to provide faster convergence and fault recovery.
BFD can also be used to monitor the connectivity of tunnels, such as GRE, IPsec, or MPLS.
Option C is incorrect, because IP-IP tunnels are stateless. IP-IP tunnels are a type of tunnels that use IP as both the encapsulating and encapsulated protocol. IP-IP tunnels are simple and easy to configure, but they do not provide any security or authentication features. IP-IP tunnels are stateless, which means that they do not keep track of the state or status of the tunnel connection. Stateless tunnels do not require any signaling or negotiation between the endpoints, but they also do not provide any error detection or recovery mechanisms.
References:
1: What is Tunneling? | Tunneling in Networking 2: What Is Tunnel In Networking, Its Types, And Its Benefits? : [Configuring Bidirectional Forwarding Detection] : [IP-IP Tunneling]

NEW QUESTION # 22
......

Are you preparing for the JN0-351 exam certification recently? Do you want to get a high score in the JN0-351 actual test? PrepAwayPDF JN0-351 practice test may be the right study material for you. When you choose Juniper JN0-351 pdf dumps, you can download it and install it on your phone or i-pad, thus you can make full use of your spare time, such as, take the subway or wait for the bus. Besides, if you are tired of the electronic screen, you can print the JN0-351 Pdf Dumps into papers, which is convenient to make notes.

Unlimited JN0-351 Exam Practice: https://www.prepawaypdf.com/Juniper/JN0-351-practice-exam-dumps.html

So, to help you prepare well for the JNCIS-ENT JN0-351 exam, we cover this preparation guide, Juniper JN0-351 Intereactive Testing Engine On-line version is the updated version based on soft version, The cruelty of the competition reflects that those who are ambitious to keep a foothold in the job market desire to get a Juniper Unlimited JN0-351 Exam Practice certification, The process to get the JN0-351 certification may be precious and worthy for you.

Finally, the system should be checked to ensure that it is operating JN0-351 Intereactive Testing Engine normally, I was one of those developers, having focused on server-side, distributed system Java development for many years.

100% Pass 2025 Newest Juniper JN0-351 Intereactive Testing Engine

So, to help you prepare well for the JNCIS-ENT JN0-351 Exam, we cover this preparation guide, On-line version is the updated version based on soft version, The cruelty of the competition reflects that JN0-351 those who are ambitious to keep a foothold in the job market desire to get a Juniper certification.

The process to get the JN0-351 certification may be precious and worthy for you, Our JN0-351 quiz torrent can help you get out of trouble regain confidence and embrace a better life.

Will Green Will Green

Biography

Quick Links

Social Media